Job Description:
1) 分析產線模具問題，改善模具狀態。 支援日常生產模具問題和改善
In charge of all problematic Die issues & Improve to a better condition; Support daily Die issues and improvements;
2) 進行模具圖紙更新和管控
Tooling drawing update and control;
3) 新模具，轉移項目調試和樣品小批量trial run
Debug new tooling and transfer dies & trial run for production;
4) 復制模具的設計及FAI調試；新的模具設計Review以及模具layout的優化
Copy die design and debug FAI；Design review on new dies or duplicate dies for layout optimization
5) 領導模具沖速的改善，減少停機時間
Lead continuous improvements on die SPM increase and downtime decrease；
6）與電鍍裝配等下工序部門的工程師進行溝通，解決模具問題
Communicate with Plating/Assembly engineers for die problem solving
7）復制模具，新增料號的模具報價評估
The quotation of copy new dies and add new products pin quotation.
8) 遵守公司、部門及管理層規定的所有紀律。
Observe all discipline and rule which come from company\ department and management.
9) 維護生產區域的安全與衛生.
Maintain good housekeeping and safety of assigned work space.
10) 完成主管或管理層分配的其他事宜.
Other duties as assigned by management.
Job Requirement:
1) 職業技術學院, 大專及以上學歷
Technical school or above level.
2)具備1年以上模具相關經驗
1+years’ progressive tooling experience.
3) 具有看懂英文說明書的能力
Can written and spoken English;
4) 良好的計算機應用能力
Be familiar with computer.
1) 分析產線模具問題，改善模具狀態。 支援日常生產模具問題和改善
In charge of all problematic Die issues & Improve to a better condition; Support daily Die issues and improvements;
2) 進行模具圖紙更新和管控
Tooling drawing update and control;
3) 新模具，轉移項目調試和樣品小批量trial run
Debug new tooling and transfer dies & trial run for production;
4) 復制模具的設計及FAI調試；新的模具設計Review以及模具layout的優化
Copy die design and debug FAI；Design review on new dies or duplicate dies for layout optimization
5) 領導模具沖速的改善，減少停機時間
Lead continuous improvements on die SPM increase and downtime decrease；
6）與電鍍裝配等下工序部門的工程師進行溝通，解決模具問題
Communicate with Plating/Assembly engineers for die problem solving
7）復制模具，新增料號的模具報價評估
The quotation of copy new dies and add new products pin quotation.
8) 遵守公司、部門及管理層規定的所有紀律。
Observe all discipline and rule which come from company\ department and management.
9) 維護生產區域的安全與衛生.
Maintain good housekeeping and safety of assigned work space.
10) 完成主管或管理層分配的其他事宜.
Other duties as assigned by management.
Job Requirement:
1) 職業技術學院, 大專及以上學歷
Technical school or above level.
2)具備1年以上模具相關經驗
1+years’ progressive tooling experience.
3) 具有看懂英文說明書的能力
Can written and spoken English;
4) 良好的計算機應用能力
Be familiar with computer.
注意：只接受英文簡歷
職位類別： 沖壓工程師
舉報溫馨提示
- 公司規模：1000人以上
- 公司性質：外商獨資
- 所屬行業：其它類
- 所在地區：四川-成都市
- 聯系人：hr唐小姐
- 手機：會員登錄后才可查看
- 郵箱：會員登錄后才可查看
- 郵政編碼：611731
工作地址
- 地址：成都市高新技術開發區西部園區科新路8號附18號
